EASYCNC BLOGS

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A06B-0310-B566#7008 2-0S20KINC/HS ST/K
A06B-0313-B765#7000 0S 25K/HR ST BRK
A06B-0313-B665#7000 0S 25K/HR ST BRK
A06B-0313-B562#7008 0S 12.5K/HR ST/K
A06B-0313-B644#7000 OS 2000P ABS W/S.C. ST BRK
A06B-0313-B031#7000 0S 2KABS TP/K
Welcome to EASYCNC online shopping at www.easycnc.net
A06B-0309-B164#7000

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A06B-0151-B675#7000 A 30/1200 A64KINC TP BRK
A06B-0153-B178#7008 A 30/3000 A 8 ST BRK W/KEY
A06B-0165-B577#7000 A M22/3000 I 64 TPR
A06B-0163-B678#7008 A M9/3000 A8 ST BRK W/KEY
A06B-0151-B177#7000 A 30/1200 64KINC ST BRK
A06B-0152-B076#7000 A 30/2000 A64 W/SUP CAP ST
A06B-0166-B675#7000 A M30/3000

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A06B-0148-B080#7000 A 22/3000 I 8 ST
A06B-0143-B678#7000 A C12/3000 A 8 TPR BRK
A06B-0127-B676#7000 A C6/2000 A64 W/SUP CAP ST BRK
A06B-0146-B078#7000 A 22/1500 A 8 ST
A06B-0141-B180#7008 A C12/1500 I 8 ST BRK W/KEY
A06B-0145-B675#7000 A C22/1500 A64 TP BRK
A06B-0123-B188#7000 A C3/3000 A1000 TP

For more details, please check EASYCNC YouTube video here.

Add a fourth axle, what should I do if the handwheel has no gear?

When adding the fourth axis, if there is no 4 axes on the handwheel or the machinery is stuck and cannot rotate to the 4 axis, what to do? Friends who have used CNC machine tools know the importance of handwheels, you can do without manual, but there must be handwheels, but what if the handwheel is not reserved for 4 axes when the machine tool leaves the factory? Many friends will say Take OFF as 4 axes, this is indeed a way, but in fact, we have a better choice. In fact, most of the band switches on the handwheel we use can be adjusted, simply put, 4 gears to 5 gears. We disassemble the handwheel to find the band switch, there will be a positioning screw on it, just remove it and move it back one position. Brother Kai has no photo in his hand, so he can only draw a schematic diagram, and everyone has the opportunity to study it themselves.

The shaft is selected, but there is no wiring behind the 4-axis band. Some friends will say: as long as XYZ has no signal, we think that it is 4 axis, then OFF is also 4 axis. Some friends will say: Then I weld a wire to the back cabinet, OK! Perfect! But Kai Ge is lazy, just don't like the wire welding, what to do? Fanuc's PLC is commonly used on the handwheel G18.0 G18.1 G18.2 when G18.0 is turned on when the axis is selected X When G18.1 is turned on, it is the axis selection Y, when G18.0 G18.1 is turned on at the same time, it is the axis selection Z, and when G18.2 is turned on, it is the axis selection 4. The following is a sample program.

 
          X3.3 is axis selection X X3.4